Ladders HQ

www.bestaluminumladders.com highlights the best aluminum ladder online. The Little Giant Ladder system. There are no better ladders around. Click on the video for more information.

When it comes to rain gutter materials, you have a wide variety of choices. From aluminum gutters to copper, steel, vinyl and others as well. One of the most popular gutters are ones made of aluminum. But, are aluminum gutters your best option to install on your home? Here’s a quick look.

Over the years there have been many improvements in aluminum gutter systems. In years past they would often have problems with the paint coming off or they weren’t as sturdy as they needed to be, but today you’ll find a lot of nice changes. Here are a few tips to look for with aluminum.

1. Thickness – If you want a long lasting aluminum gutter, then you should be sure it is at least .032 inches thick. Anything thinner than that will lead to problems. A ladder can easily bend it and a heavy rain can cause sagging or bowing.

2. Paint – Always read the warranty about paint finishes to be sure you are covered for years in the future. In addition, the paint on traditional aluminum gutters has always held up better than the coil stock that makes seamless gutters.

3. Attaching It To Your Roof – The age old method of using long spikes through ferrules or metal tubes, is one that should be laid to rest. Why? Because this method does not allow your rain gutter to expand and contract. Then what happens is the spikes come out of the fascia board from being stressed over time.

The best method of installing rain gutters is by using hidden hangers or clips. Hangers allow your gutter to go through the expansion and contraction process without doing any damage. One key point here though is to always find out the weight bearing limits of the gutter system.

Rain gutters and downspouts are essential to your home and foundation. Without them, your home can suffer from erosion, wood rot and a whole host of other issues. Gutters are an inexpensive solution to avoiding these problems.

Aluminum gutters have made good improvements over the years. If you need to replace your homes gutter system you won’t go wrong with using aluminum as a material.

All Rights Reserved Worldwide. Reprint Rights: This article may be freely reprinted or distributed in its entirety in any ezine, newsletter, blog or website as long as the author’s name and all website links remain intact and be included with every reproduction.

I wrote up the Maxus EX8016 X-Lite compressor as an Editor’s Choice product for our HGTVPro news show HGTVPro.com Weekly, but I only recently had a chance to use the tool for any length of time. While I don’t usually run a double-coverage defense with products I include on the show, I was so impressed with the 4-gallon twin-stack unit and its bevy of smart features that a real-time review had to happen.

Bottom line. Let’s start with the BL. I used the 1.3 horsepower, 3.7 SCFM X-Lite in the three highest-drain applications I encounter as a home-improvement contractor: nailing off sheathing, running a roofing gun, and using my old Shingle Saw Pro II. It kept pace through and through.

I had absolutely no issue with laddered nails while rapid firing 8d, ring-shank nails or popping off shingles. And I wasn’t nailing into any brand new softy 2×10 SPF; I was gunning into 80-year old Doug fir 1×12 sheathing and 2×8 rafters. I drove four nails into every 1×12 board up the roof — a way tighter nailing schedule than 1/2- inch roof decking, wall sheathing or subfloor. My nailer never starved for air.

It’s worth pointing out that the EX8016 is a heavy breather and really liked having a dedicated cord straight out of the power supply — it tripped the lame-o surge suppressor strip I use as a multi-plug (no surprise, no demerits) — but on its own 100-foot cord, it ran fine, even in temps right around freezing.

I also ran my Shingle Saw Pro II. This pneumatic shingle saw (no longer in production; it’s been re-designed) gobbles air big time. Nevertheless, one-off shingle cuts were a snap. Impressive. And X-Lite recovered quickly when the tank drained.

Weight a minute. When a tool’s weight passes a certain threshold — around 80 pounds — carrying it becomes an experience of both necessity and pure dread. Such is the case with most compressors I’ve owned. But — and I mean and ALL-CAPS-bold-italics BUT — the X-Lite’s aircraft quality aluminum tanks drops this baby’s gross vehicle weight to a mere 57 pounds. I won’t say that’s feather-light, but holy mack-o (as my daughter says), there’s no comparison between the X-Lite and other compressors where the lift-and-lug process toggles between a serious chafe at the minimum to an exercise in blood-pressure management by week’s end.

Details done right. Beyond the light weight, the Maxus designers kept pushing during their design charrettes and executed smart, savvy details that carry the X-Lite furlongs further towards top-of-el-heapo status.

It starts with a carry handle/roll cage that’s aces. See, the compressor is cubic — roughly the same shape as other compressors in the class — but the handle is positioned to deliver optimum carry efficiency between truck and site or between floors. Combined with its lighter weight, you can practically carry it like a suit case without having a back surgeon on speed-dial.

The roll-cage part of the handle houses everything — supply lines, gauges and the pump motor, to name a few biggies — so that it’ll be darn tough to break them when Bruno the Meatball javelins a shovel or stack of 2x6s into the back of your truck.

Speaking of the truck and cubism, the machine really is cubic! This means that there aren’t hose fittings, gauges, cords, or round/odd shapes sticking beyond the tool’s recti-linear perimeter. How much do I love this when loading the truck? Seriously, thanks, Maxus, for yet another weapon against entropy.

What I also love (but can’t recommend, of course) is that because the tool really is cubic, if you happen to load something on top of it in the truck or gang box, so what? Certainly loading tool and kit boxes around it is easier than any other compressor I’ve used. This is really smart design.

Here’s some other cool stuff:

· The +/- pressure dial is easy to see, read, locate and use.

· There are two (thank you, lord) air ports right on the front of the tool.

· The cord is long enough too. I like this for trim or floor jobs where I might have the compressor in the room with me and need to move it here and there for whatever reason.

· The gauges are easy to see and read.

· Rubber feet mean I don’t have to worry about putting the tool down on a finished floor. Tip: placing any compressor in the finished space on a piece of cardboard helps curb possible damage to the floors.

· It has an oil-lube pump; I don’t mind changing the oil in every so many — er — years.

My only complaint. I wouldn’t be living up to the secret writer’s code if I didn’t find at least one thing ‘wrong.’ Seriously, you get nasty letters from the Writers Guild if you don’t. Anyway, it’s the same complaint I have with all compressors and one that’s a super-easy fix: the drain valve. I’d swap out the existing valve (one of those backwards-threaded 1/2 inch twist deals) with a ball valve. ‘Nuff said.

Maxus-ed out. If you ask me, the Maxus EX8016 X-Lite compressor is the current industry leader in this category.

• Lightweight and easy to move from job to job
• Safe to use on staircases or uneven surfaces
• Comfortable standing surface at any height between 4 and 6 feet

Product Description
The Little Giant Synergy is a lightweight, industrial strength adjustable stepladder for in-home and professional use. The Synergy features the deepest rungs on any adjustable stepladder and includes a wide-flared leg for extra comfort and stability. The Synergy can be used safely on stairs and uneven surfaces and includes the innovative NoPinch spreader system, which makes the Synergy easier to open and close and provides comfortable, firm footing. The Synergys inn… More >>

Little Giant 15113 Synergy 1A 300lb Rated Aluminum 4′ – 6′ Adjustable Step Ladder